Anasayfa / Microtest 7713 ImpulseSurge Tester
Product Description:
7713 is a 2-channel 10KV impulse winding tester and able to measure inductance down to 0.5uH as well as magnify high-frequency harmonics to prevent shorts between the layers of windings. Mild corona occurring between coils would create harmonics with small amplitude and high frequency (>10MHz) which cannot be detected by a regular impulse winding tester that can only observe mild amplitude without actually identifying the fault. MICROTEST 7713 deploys “High-frequency harmonics analysis HARM “technique to magnify high-frequency harmonics then display them on screen then identify each mild discharge between layers and ensure the quality of each component coil.
High-frequency harmonics analysis has the capability to detect slot lines
Low power non-destructive test analysis
Automatic Level Control Function (ALC)
Waveform learning comparison to achieve rapid test speed
Measure voltage up to 10,000V
Measure the lowest inductance to 0.5uH
Interchangeable between Chinese and English operational interfaces/ Provide statistic and print functions
High-frequency noise signal analysis has the capability to detect slot line
Auto voltage Learn function
Product Specification:
Measurement Data
Channel 2
Impluse Voltage 200V ~ 10000V
Lowest Inductance Value 0.5uH
Accuracy ±2%
Measurement time 50mS
Measurement Mode The comparison between standard and test waveforms
Indicators Pass/Fail HV LED red-green indicator lights/Screen Display/Sound
Specifications
Power Supply 98 ~ 132Vac or 192 ~ 264Vac
Display 320*240 dot-matrix display
Interface RS-232, Print Port, Remote Control
Flash Memory Storage of 200 rewritable data sets
Operation Auto、Manual
Environment Temperature : 10℃ to 40℃ Humidity : 20 ~ 90%
Dimension (W*H*D) 435x133x525 (mm)
Weight 8 (Kg)
Measurement Items
HARM
HFLT
Total Area
Area size comparison
Waveform comparison
Flutter
Corona
Applications
Inverters, Power Inductors, Winding, Transformers, Motors, Wave Filters, Capacitors and Circuit breaker
Firmamız Kasım 2014 tarihinde şahıs firması olarak Deniz ÇAPAROĞLU tarafından kurulmuş olup, DGCA Mühendislik Taahhüt ve Danışmanlık Tic. Ltd. Şti. olarak hizmetlerine devam etmektedir.